Hot Link Pro

Hot Link Pro

If your A/V equipment is housed behind an opaque cabinet door or in a closet, IR remote signals will not be able to reach it. Hot Link Pro solves this problem by routing the IR signals into the closed cabinet or closet. This allows you to keep equipment out-of-sight and out-of-reach of inquisitive little fingers, dust, and dirt. The high sensitivity of the Hot Link Pro receiver can also extend the range of your remotes.

Simply mount the Hot Link Pro receiver through a hole in the cabinet, closet wall, or in some other convenient external location, route the cable inside the cabinet or closet, and attach the emitters to your A/V equipment. Hot Link Pro’s IR receiver gives you even more flexibility than previous models with its new slimline design, a side sensor, and a 3′ cable running from the sensor to the Repeater Box. Hot Link Pro also features a “Talk-Back” LED that blinks to confirm receipt of IR commands. Manufacturer’s part number: HL-1PRO.

Hot Link Pro includes 6 emitters attached to a 7 ft. ribbon cable that can be easily split for running emitters to different components. An 120 volt AC to 12 volt DC adapter is included. For use in 220/240 volt countries, use a locally obtained 220/240 VAC to 12 volt DC, 100 mA adapter.

o Allows use of an IR remote on equipment that’s behind opaque doors
o Enhances remote control performance for up to 6 A/V components
o New slim design, side sensors, and 3’ sensor cable allow more flexible positioning
o New “Talk-Back” LED confirms receipt of IR commands

See Review!

Price: $99.99
(Please note prices are subject to change and the listed price is correct to the best of our knowledge at the time of posting)