T12 Surge Protector

T12 Surge Protector

The T12 is the second model of the T series of tributaries power strips. This model is similar to the previously available T10 model. The T12 power strip was designed to give easy accessibility to any wall wart power supply. T12 models have twelve different outlets in which eight of the outlets rotate 90 degrees. This makes it easier when plugging in from different directions and angles. The remaining four outlets are equipped with safety shutters.

The T12 also features a built in resettable circuit breaker that is set with the power push button. The model has two led lights to show that the power strip is working properly. The red light shows that the power strip is working correctly, and the blue light shows that the outlets that are connected are grounded. The T12 also comes with a cord management design so that all the cords will stay organized.

T12 models are setup to protect all three legs of the AC line. The models are rated at 1875 watts and 125VAV/ 15A 60 Hz. The power strip is also made to with stand a voltage spike of 6KV and has a clamping voltage of 330V. Energy levels of 4320 joules can easily be dissipated by the T12 models. The power strip also has surge protection for the telephone/modem, and the f connectors. T12 is produced with a wide band line filter that will prevent EMI/RFI noise from interfering with connected equipment. It can reduce noise levels from around 150 KHz to somewhere around 100 KHz.

The T12 models have been rated with 8 separate listings from the Underwriters Laboratory ranging from the Standard Surge Protection Device (UL1449) to Standard Electromagnetic Interference Filters (UL1283). It also meets the requirements of California’s Electronic Waste Recycling Act of 2003. This means that the T12 is RoHs (Restricted and Hazardous Substance) compliant.

Price: $120.00 (Please note prices are subject to change and the listed price is correct to the best of our knowledge at the time of posting)